1) adopted the reversing electronic components, do not need to use the carbon brush.
2) with high-performance wear-resistant stainless steel shaft and shaft sleeve with magnets by injection molding into overall to avoid wear and tear, greatly enhance the life (can take up to 10 years, without maintenance);
3) completely isolated part of the stator and rotor part of the water pump, stator and circuit board part USES epoxy potting, 100% waterproof;Can the amphibious 2 with!
4) part adopts permanent magnet rotor, pump body use environmental protection material, low noise (less than 35 db), small volume of high efficiency low power consumption;
5) can be regulated by the stator winding of required parameters, can run wide voltage, such as 12 v can be modulated 1 M head, also can be 1.8 M head modulation;
6) the pump fixed base with suction cups.
Directions for use:
1. No overpressure operation.It is forbidden to exceed the highest voltage.Battery charged if no limited pressure measures, will be serious overpressure, cannot guarantee their supply voltage test first, please.
2. Not allowed to use the ac power, the router power supply, the power of the computer the cat and the like are a lot of communication, can't use!
3. Ripple problem (the most vulnerable places) : most of the half-wave rectifier dc transformer, the result is mixed a lot of communication in dc component, the pump will be bad!Brushless pump must be full-wave rectifier!Don't understand, please consult a professional!
4. Lift problem: 2.2 meters such as lift is not to say that can spray 2.2 meters high, the power is connected head is pointed out that the gate after the hoses, the vertical height in water in the pipe.Spray height is lower than lift a lot!
Enterprise live show