Horizontal Clarified Water Centrifugal Single-Stage Pump
|FOB Price:||US $336 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $336/ Piece|
|Production Capacity:||1000 PCS/Year|
|Payment Terms:||L/C, T/T, Paypal, Western Union|
- Model NO.: TYF160303
- Working Pressure: High Pressure Pump
- Position of Pump Shaft: Horizontal Pump
- Mounting Height: Suction Centrifugal
- Usage: Centrifugal Pump
- H.Max: 5~125 M
- Driving Method: Motor-Driven
- Trademark: Pumtip
- Origin: Ningbo Zhejiang
- Impeller Number: Single-Stage Pump
- Influent Type of Impeller: Single Suction Pump
- Pump Casing Combined: Horizontal Split Pumps
- Impeller: Closed
- Q.Max: 6.3~400 M*3/H
- Power: 0.55~90 Kw
- Material: Cast Iron
- Specification: CE
IS series single stage centrifugal pump
GIS and IR Type Horizontal single-stage single suction centrifugal pump is the joint design of energy-saving pump, it is the Ba, renewal and type of BL type and other single stage centrifugal pump. Advantages: reasonable layout of the full range of hydraulic performance, wide range of users select and maintenance convenience, efficiency and suction lift reached the international advanced level on average. This type of pump applicable to industrial and urban water supply, drainage, can also be used for agricultural drainage and irrigation and for conveying water or the physical and chemical properties similar to water and other liquids, high temperature of 80 DEG C.
IS series single stage centrifugal pump features
1, is, IR Type Horizontal single-stage single suction centrifugal pump designed according to the international standard ISO2858 performance and size of, mainly by the pump body, pump cover, impeller, shaft, sealing ring, shaft sleeve and suspension bearing don't see.
2, is, IR Type Horizontal single-stage single suction centrifugal pump water pump body and pump cover part is from the section at the backside of the impeller, commonly referred to as open structure. The utility model has the advantages of easy maintenance, maintenance Real pump, suction pipe, discharging pipeline and a motor, only need to remove and long axis of the middle connecting piece, you can exit the rotor parts for maintenance.
3, pump shell (i.e. pump and pump cover) constitute the pump studio. The impeller, shaft and rolling bearing for pump rotor. The suspension bearing part supporting the rotor part of the pump, rolling bearing pump axial force and radial force.
4, in order to balance the pump axial force, before most of the pump impeller, are equipped with sealing ring, and the back cover plate of the impeller balance hole is, not because of the some of the axial force of pump, the backside of the impeller did not set the sealing rings and balance holes.
5, pump axial sealing ring is composed by the packing gland, packing ring, packing and so on, to prevent intake or a large number of leaks. If the pump impeller balance is equipped with soft packing of the cavity and impeller suction port connected, such as the liquid in the impeller inlet is in a vacuum state, easily along the shaft sleeve on the surface of the inlet, so in stuffing cavity fillers are filled ring through a small hole on the cover of the pump, and the water of the pressure in the pump chamber to ring packing seal. If no balance hole on the impeller of the pump, due to the backside of the impeller fluid pressure greater than atmospheric pressure, so there is no problem of air leakage, so it can not filling ring.
6, in order to avoid shaft wear, in the shaft through the packing chamber part of which is provided with a protecting sleeve. Between the sleeve and the shaft must have o type sealing ring to prevent along the mating surface intake or leakage.
7, the drive pump is connected with the motor by lengthening the elastic coupling, the direction of rotation of the pump, viewed from the driving end, rotating in clockwise direction.
IS series single stage centrifugal pump performance parameter