5 Gallon Bottle Plastic Drinking Manual Water Pump

• After-sales Service: Forever
• Warranty: One Year
• Max.Head: <10m
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BR-08
• Max.Capacity: <50 L/min
• Driving Type: Hand
• Material: Plastic
• Structure: Single-stage Pump
• Assembly: No
• Power: Electric
• Start Up: Electric Pump
• Type: Water Fountain
• Application: Water Pump
• Industry: Water Fountain
• Media: Clean Water
• Performance: No
• Theory: Electric
• Package: Color Package
• Place of Origin: Zhejiang, China
• Housing Material: Plastic
• Pipe Length: 16.2cm
• Power Source: Manual
• Product Name: Water Dispenser Pump
• Accessories: Pump + Water Pipe *3
• Advantage: Portable Size
• Transport Package: Carton Package
• Specification: Plastic
• Trademark: ONEREEL
• Origin: Ningbo China
• Production Capacity: 10000pieces a Month
• Package Size: 25.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 0.062kg

Product Description

5 Gallon Bottle Plastic Drinking Manual Water Pump
 

Product Description

 

Directions for use

1. Unscrew the cap on the pump handle and inset two "D"size batteries into the handle in the direction indicated by the (+) and (-) markings.

2. Remove the tube cover cap and attatch with fastener top bottle neck,after adjusting with the bottle cap to height of container. Be sure keep suction tube cover1/4 to 3/4 above the bottom of container.

3. Snap on the discharge spout to the discharge hole on the frame of the pump.

4. Push button and the water will flow, push again to stop.

5. When used for the first time, let water run for 30 to 60 seconds to clean out pump.

 

Features of manual water pump BR-08:

1) Material:sky blue PP plastic

2) Fit 3 or 5 gallon water bottle

3) Good mate for drink water

4) Fufure-proofed, strongest

5) FDA food grade materials

6) Flexible wide using place

Product Parameters

 

Technical Parameter

Color	Grey-blue
Material	1-Pump
Item Display Dimensions	10.4 x 5.8 x 4.4 inches
Capacity	6 Gallons
Brand	ONEREEL  Water Pump
Style	8080 w/out Sanitary Cap
Weight	2 Pounds
Access Location	Bottom
Power Source	Hand Powered

 

Advantage:

Easy working, just press pump head
Economic, no battery, cost no motor
Fit most standard 55mm gallon bottle
Certificate: CE, FDA, GS, CB, ROHS

why use "best" manual water pump?

1 going green (no batter ,no motor)

2 dust-proof outlet

4 no drips or leakage

5 easy cleaning

6 health and safety

7 very durable life

 

This pressure pump is used to pump water from distilled,spring and reverse osmosis water bottles.It is made to fit various sizes of water bottles.It is very convenient ,labour saving ,with a high water flow.It is suitable for many uses,whether for the family,cottage,office,school or camp.

1.Before using,the pump must be assembled properly.The first thing to do is to submerge the pump upper ube into boiling water.The hot water causes the plastic to become a litle soft.This allows for the tube to be more firmly connected witjin the head.

2.Immediately after removing the pump from the boiling water ,insert the upper tube into the bottom of the pump.Tigthen it quite firmly .Otherwise the seal will not be good,and this will adversely affect the efficiency of the pump.

3.When using the pump,the seal swivel cap should be tightened .The pump works by increasing air pressure within the bottle.If the seal is loose,the air will not build up and will slow the flow of water.

4.Gently press down the large press button ,and the water will begin to flow.

Company Information:   
NINGBO ONEREEL MACHINE CO., LTD.Business Type :Manufacturer.
Product Range :Pumps and other Mechanical and electrical rquipment.Products Service:Water pumps, Gas pumps, Vertical multistage cemtrifugal pumps,chemical pumps
Year Established :2011.
Certificate :GS , CE , GB , ISO14001 , CCC.
Company Address :No.1229 Baoshan Road, Daqi, Beilun, Ningbo 315800 China, Ningbo, Zhejiang, China.

ONEREEL is specialized in the design and manufacture , , , ,   , ,  , , , , , , , , and in the industry since 1991. All of our customer spool and wire carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.
ONEREEL is specialized in the manufacture of reels for cables and electric wires, iron axles, disc spool for steel cables and various delivery reels. With strong technological capabilities and full series of production equipment. All of our products go through the dynamic and static balance tests. We have passed the quality system certification ISO9001:2000 to ensure the product quality. Following the standards of GB4004-83, JB/T8997, DIN46395 and DIN46397 in productions. 

Detailed Photos

 

Product Detail

 

 

Hot Product

Packaging & Shipping

 

Packaging & Transportation

Certifications

 

Authoritative Certificate

 

FAQ

 

FAQ

Q1: Can I get samples?
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME? 
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods, 
we may advise FEDEX or other couriers' charge for your check. 
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.