Hy15/20-PP 1/2" Pneumatic Diaphragm Pump for Chemical Chocolate Honey

• Customization: Available
• After-sales Service: Forever
• Warranty: One Year
• Model NO.: TY15102210
• Certification: ISO9001:2000, RoHS, CE
• Rated Current: 5-10A
• Voltage: 24V
• Material: Stainless Steel
• Power: Electric
• Valve Body Type: Direct Double-Seat
• Function: Solenoid Valve, Electronic Type, Intelligent Type
• Diaphragm Material: Resistance to Acid Alkali
• Performance: Pneumatic Diaphragm Pump
• Pressure: 8.4bar
• Power Source: Pneumatic
• Structure: Diaphragm Pump
• Theory: Reciprocating Pump
• Transport Package: Wooden Package
• Specification: CE
• Trademark: Pumtip
• Origin: Ningbo China
• Production Capacity: 1000 Pieces a Month
• Package Size: 50.00cm * 60.00cm * 30.00cm
• Package Gross Weight: 5.000kg

Product Description

HY15/20-PP 1/2" Pneumatic Diaphragm Pump for Chemical Chocolate Honey

Product Description

 

 

The characteristics of pneumatic diaphragm pump products
1, do not need irrigation water diversion, up to 5 meters, suction lift up to 70 meters, the outlet pressure >= 0.8 Mpa
2, flow and spacious, with good performance, the allowed maximum particle diameter by 10 mm.When pumping mud, impurities, the pump wear little;
3, head and flow rate can be adjusted by the valve opening (pressure adjusting between 1-7 bar)
4, the pump no rotating parts and no shaft seal, diaphragm, such as the movement of the pump and pumping medium components, workpiece medium completely separated, the conveying medium will not leak out.So when pumping toxic, volatile or corrosive medium, not cause environmental pollution and harm the personal safety;
5, don't have to use electricity, use safe and reliable in inflammable and explosive places

 

6, work can be immersed in the media
7, easy to use, reliable operation, stop by simply opening and closing the gas valve, even if long time no medium due to unexpected run or suddenly stop the pump will not be damaged because of this, once the overload, the pump will automatically stop, self protection performance, when the load is back to normal after, can run automatically start again;
8, simple structure, less wearing parts, the pump has simple structure, convenient installation, maintenance, pump will not come into contact with the medium of high-pressure air, link and other moving parts, unlike other types of pumps for rotor, piston, gear, blade and other parts of wear and make the performance decline gradually;
9, may transport the sticky liquid under 10000 centipoise (viscosity);
10, this pump without oil lubrication, even if the idling, is without any effect on the pump, this is the pump a feature;
Pneumatic diaphragm pump applications

 

1, the pump suction paints, rubber, paint.
2, glue and glue, all kinds of available drain pump.
3, pumped peanut butter, pickles, mashed potatoes, apple pulp small sausage, fruit jam, chocolate, etc.
4, all kinds of tiles, porcelain, tiles, and pottery glaze slurry.
5, oil drilling, pump suction sediments and grouting.
6, various emulsion pump suction and packing.
7, pumped all kinds of wastewater.
8, pump for oil tankers, barges clearance drain sewage in warehouse.
9, hops and yeast slurry, syrup, sugar.

 

10, pumped mine, tunnel, tunnel, ore dressing, slag in water.Pumped cement grout and mortar.
11, all kinds of rubber slurry.
12, all kinds of abrasive, corrosion inhibitor, oil and mud, cleaning oil dirties and general container.
13, all kinds of highly toxic, flammable, volatile liquid.
14, all kinds of strong acid, strong alkali, strong corrosive liquid.
15, all kinds of high temperature liquid up to 150 ºC.

 

Product Parameters

 

Technical Parameter

Mode	Max.Suction Lift (dry\wet,m)	Max. particle diameter (mm)	Suction and discharge size (inch)	Air inlet size (inch)	Max. flow rate (L/min)	Max. air consumption (m^3/min)
HY-15/20	4 \ 7.6	2.5	1/2  3/4	1/4	57	0.672
HY-25	4 \ 8	4	1	1/2	157	1.7
HY-40	5 \ 8	5	1½	1/2	358	3.5
HY-50	5 \ 8	6	2	1/2	587	4.9
HY-80	5 \ 8	9.4	3	3/4	1060	9.1

 

ONEREEL is specialized in the design and manufacture , , , ,   , ,  , , , , , , , , and in the industry since 1991. All of our customer spool and wire carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.

ONEREEL is specialized in the manufacture of reels for cables and electric wires, iron axles, disc spool for steel cables and various delivery reels. With strong technological capabilities and full series of production equipment. All of our products go through the dynamic and static balance tests. We have passed the quality system certification ISO9001:2000 to ensure the product quality. Following the standards of GB4004-83, JB/T8997, DIN46395 and DIN46397 in productions. 

 

 

Hot Product

Our Customer

 

 

Packaging & Shipping

 

Packaging & Transportation

 

Certifications

 

Authoritative Certificate

 

FAQ

 

FAQ

Q1: Can I get samples?
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME? 
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods, 
we may advise FEDEX or other couriers' charge for your check. 
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.