Resistance to Acid Alkali 2 Inches of Perfluorinated Pneumatic Diaphragm Pump
The characteristics of pneumatic diaphragm pump products
1, do not need irrigation water diversion, up to 5 meters, suction lift up to 70 meters, the outlet pressure >= 0.8 Mpa
2, flow and spacious, with good performance, the allowed maximum particle diameter by 10 mm.When pumping mud, impurities, the pump wear little;
3, head and flow rate can be adjusted by the valve opening (pressure adjusting between 1-7 bar)
4, the pump no rotating parts and no shaft seal, diaphragm, such as the movement of the pump and pumping medium components, workpiece medium completely separated, the conveying medium will not leak out.So when pumping toxic, volatile or corrosive medium, not cause environmental pollution and harm the personal safety;
5, don't have to use electricity, use safe and reliable in inflammable and explosive places
6, work can be immersed in the media
7, easy to use, reliable operation, stop by simply opening and closing the gas valve, even if long time no medium due to unexpected run or suddenly stop the pump will not be damaged because of this, once the overload, the pump will automatically stop, self protection performance, when the load is back to normal after, can run automatically start again;
8, simple structure, less wearing parts, the pump has simple structure, convenient installation, maintenance, pump will not come into contact with the medium of high-pressure air, link and other moving parts, unlike other types of pumps for rotor, piston, gear, blade and other parts of wear and make the performance decline gradually;
9, may transport the sticky liquid under 10000 centipoise (viscosity);
10, this pump without oil lubrication, even if the idling, is without any effect on the pump, this is the pump a feature;
Pneumatic diaphragm pump applications
1, the pump suction paints, rubber, paint.
2, glue and glue, all kinds of available drain pump.
3, pumped peanut butter, pickles, mashed potatoes, apple pulp small sausage, fruit jam, chocolate, etc.
4, all kinds of tiles, porcelain, tiles, and pottery glaze slurry.
5, oil drilling, pump suction sediments and grouting.
6, various emulsion pump suction and packing.
7, pumped all kinds of wastewater.
8, pump for oil tankers, barges clearance drain sewage in warehouse.
9, hops and yeast slurry, syrup, sugar.
10, pumped mine, tunnel, tunnel, ore dressing, slag in water.Pumped cement grout and mortar.
11, all kinds of rubber slurry.
12, all kinds of abrasive, corrosion inhibitor, oil and mud, cleaning oil dirties and general container.
13, all kinds of highly toxic, flammable, volatile liquid.
14, all kinds of strong acid, strong alkali, strong corrosive liquid.
15, all kinds of high temperature liquid up to 150 ºC.
Company Information:
NINGBO ONEREEL MACHINE CO., LTD.Business Type :Manufacturer.
Product Range :Pumps and other Mechanical and electrical rquipment.Products Service:Water pumps, Gas pumps, Vertical multistage cemtrifugal pumps,chemical pumps
Year Established :2011.
Certificate :GS , CE , GB , ISO14001 , CCC.
Company Address :No.1229 Baoshan Road, Daqi, Beilun, Ningbo 315800 China, Ningbo, Zhejiang, China.
ONEREEL is specialized in the design and manufacture Steel Spools, Plastic Spools, Cable roller, Yarn Bobbin, aluminum spool , Cable Reel Stand, Sheave Pulley, Cable Conveyor, Hydraulic Puller Tensioner, Gin Poles, Cable Pulling Winch, Safety Tools, Wire Grip, Plastic Parts, and Pump in the industry since 1991. All of our customer spool and wire carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.
ONEREEL is specialized in the manufacture of reels for cables and electric wires, iron axles, disc spool for steel cables and various delivery reels. With strong technological capabilities and full series of production equipment. All of our products go through the dynamic and static balance tests. We have passed the quality system certification ISO9001:2000 to ensure the product quality. Following the standards of GB4004-83, JB/T8997, DIN46395 and DIN46397 in productions.
Hot Product
Our Customer
Packaging & Transportation
Authoritative Certificate
FAQ
Q1: Can I get samples?
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME?
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods,
we may advise FEDEX or other couriers' charge for your check.
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.
Audited Supplier 
){kind=link}
){kind=link}