Factory Direct Sales Multi-Functional Submersible Pump Silent Filter Circulation Pump
Product features:
1) adopted the reversing electronic components, do not need to use the carbon brush.
2) with high-performance wear-resistant stainless steel shaft and shaft sleeve with magnets by injection molding into overall to avoid wear and tear, greatly enhance the life (can take up to 10 years, without maintenance);
3) completely isolated part of the stator and rotor part of the water pump, stator and circuit board part USES epoxy potting, 100% waterproof;Can the amphibious 2 with!
4) part adopts permanent magnet rotor, pump body use environmental protection material, low noise (less than 35 db), small volume of high efficiency low power consumption;
5) can be regulated by the stator winding of required parameters, can run wide voltage, such as 12 v can be modulated 1 M head, also can be 1.8 M head modulation;
6) the pump fixed base with suction cups.
Directions for use:
1. No overpressure operation.It is forbidden to exceed the highest voltage.Battery charged if no limited pressure measures, will be serious overpressure, cannot guarantee their supply voltage test first, please.
2. Not allowed to use the ac power, the router power supply, the power of the computer the cat and the like are a lot of communication, can't use!
3. Ripple problem (the most vulnerable places) : most of the half-wave rectifier dc transformer, the result is mixed a lot of communication in dc component, the pump will be bad!Brushless pump must be full-wave rectifier!Don't understand, please consult a professional!
4. Lift problem: 2.2 meters such as lift is not to say that can spray 2.2 meters high, the power is connected head is pointed out that the gate after the hoses, the vertical height in water in the pipe.Spray height is lower than lift a lot!
Enterprise live show
Product Data
| Product name |
submersible pump |
| Model |
GP-680B |
Power |
75W |
| Size |
142*85*103mm |
Voltage |
AC:220-240V |
| Hmax |
3.2m |
frequency |
50HZ |
| Flow |
3200L/H |
Outlet size |
16/19mm |
Company Information:
NINGBO ONEREEL MACHINE CO., LTD.Business Type :Manufacturer.
Product Range :Pumps and other Mechanical and electrical rquipment.Products Service:Water pumps, Gas pumps, Vertical multistage cemtrifugal pumps,chemical pumps
Year Established :2011.
Certificate :GS , CE , GB , ISO14001 , CCC.
Company Address :No.1229 Baoshan Road, Daqi, Beilun, Ningbo 315800 China, Ningbo, Zhejiang, China.
ONEREEL is specialized in the design and manufacture Steel Spools, Plastic Spools, Cable roller, Yarn Bobbin, aluminum spool , Cable Reel Stand, Sheave Pulley, Cable Conveyor, Hydraulic Puller Tensioner, Gin Poles, Cable Pulling Winch, Safety Tools, Wire Grip, Plastic Parts, and Pump in the industry since 1991. All of our customer spool and wire carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.
ONEREEL is specialized in the manufacture of reels for cables and electric wires, iron axles, disc spool for steel cables and various delivery reels. With strong technological capabilities and full series of production equipment. All of our products go through the dynamic and static balance tests. We have passed the quality system certification ISO9001:2000 to ensure the product quality. Following the standards of GB4004-83, JB/T8997, DIN46395 and DIN46397 in productions.
Our Customer
Hot Product
Packaging & Transportation
Authoritative Certificate
FAQ
Q1: Can I get samples?
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME?
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods,
we may advise FEDEX or other couriers' charge for your check.
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.
Audited Supplier 
){kind=link}