Vertical Sewage Pump for Sale
Pipe sewage pump main use:
1, enterprise units waste water discharge.
2, the urban sewage treatment plant emissions system.
3, residential sewage drainage station.
4 drainage station, subway, basement, civil air defense system.
5, hospital, hotel, high-rise building wastewater discharge.
6, municipal engineering, construction sites in the thin mud emissions.
7, sewage farms and rural farmland irrigation.
8, productive waterworks water supply device.
9, mining exploration and form a complete set of water treatment equipment.
10, water supply, drainage, water conservancy projects.
Pipe sewage pump product features:
1, sewage capability is strong, no jam.
2, reasonable design, small motor power, energy-saving effect is remarkable.
3, the wear-resisting of mechanical seal.
4, compact structure, easy to move, easy installation, without the construction of pump room, reduce the project cost.5, able to run within the range of head, and will not overload of motor.
6, the center line of the inlet and outlet has been online, anywhere can be directly installed in the pipeline.
Pipe sewage pump conditions of use:
1, transmission medium temperature does not exceed 80 ºC.
2, transmission medium to heavy for 1 ~ 1.3 Kg/dm3.
3, the material of pump is mainly for cast iron, cannot be used for transmission of highly corrosive liquid.
Around 4, water pump, the pump should be well ventilated.
5, 1 cr18ni9ti stainless steel material can be used to transport all kinds of corrosive liquid.If users have special requirements, when order, please indicate the relevant situations of the transmission medium, so that the company provide a more reliable product.
Sewage pump maintenance and maintenance:
(1) check whether there is any loose phenomenon on sewage pump pipe road and the junction.Turn the sewage pump with the hand, and proved the sewage pump is flexible.
(2) to the bearing body join bearing lubrication oil, should observe the oil level in oil mark the centerline, lubricating oil should be timely replacement or supplement.
(3) unscrewing sewage pump pump body of water diversion plug, water perfusion (or plasma).Self-priming sewage pump
(4) close out of the water gate and export of pipeline pressure gauge and imported vacuum gauge.
(5) the motor running, and proved the motor steering is correct.
(6) to start the motor, after the sewage pump operation, open the outlet pressure gauge and imported vacuum pump after it shows that proper pressure, gradually open the gate valve, check the motor load condition at the same time.
(7) to control the capacity and head of the sewage pump, within the scope of the specified on the sign to ensure sewage pump running at peak efficiency, in order to achieve maximum energy saving effect.
Sewage pump (8) in the process of operation, bearing temperature cannot exceed environment temperature 35 c, the highest temperature should not exceed 80 c.
(9) in case of abnormal sound of a sewage pump should immediately stop check.
(10) sewage pump to stop using, first close the gate valve, pressure gauge, then stop the motor.
(11) in sewage pump in the first months of work, the oil change 100 hours, every 500 hours, after oil change at a time.
(12) often adjust the packing gland, packing materials indoor drip situation is normal (in a drip out as appropriate).
(13) regularly check the wear condition of shaft sleeve, wear after the larger should be replaced in a timely manner.
(14) sewage pump when used in cold winter season, parking, the lower part of pump body must be drain plug unscrewed the net medium.To prevent the frost crack.
(15) sewage pump stopped for a long time, the pump must be opened entirely, dry the water, will turn the parts packed and junction coated with grease.
Processing: clean water pump and water pipes, replace the mouth ring.Internal abnormal voice phenomenon 5: water pump, water pump water.
Technical Parameter
|
|
|
|
MODEL
|
100NL100-10
|
MOQ
|
5pcs
|
|
Voltage
|
380V
|
Brand
|
JESLE(support OEM)
|
|
Power
|
7.5KW
|
Certificate
|
CE, ISO
|
|
Frequency
|
50HZ
|
Packing
|
Wooden Box Fully Guarantee The Safety Of Tranportation.
|
|
Max. Flow .
|
100m³/h
|
Warranty
|
12 months
|
|
Max. Head
|
10m
|
Place of Origin
|
Zhejiang, China
|
|
Inlet/Outlet
|
4inch
|
Delivery term
|
30-40 days
|
|
Cable
|
8m
|
Loading port
|
Ningbo or other china port
|
|
Max. depth
|
5m
|
LXWXH
|
86.5*37*49.5
|
|
Weight
|
128kg
|
20ft.Qty.
|
150pieces
|
Company Information:
NINGBO ONEREEL MACHINE CO., LTD.Business Type :Manufacturer.
Product Range :Pumps and other Mechanical and electrical rquipment.Products Service:Water pumps, Gas pumps, Vertical multistage cemtrifugal pumps,chemical pumps
Year Established :2011.
Certificate :GS , CE , GB , ISO14001 , CCC.
Company Address :No.1229 Baoshan Road, Daqi, Beilun, Ningbo 315800 China, Ningbo, Zhejiang, China.
ONEREEL is specialized in the design and manufacture Steel Spools, Plastic Spools, Cable roller, Yarn Bobbin, aluminum spool , Cable Reel Stand, Sheave Pulley, Cable Conveyor, Hydraulic Puller Tensioner, Gin Poles, Cable Pulling Winch, Safety Tools, Wire Grip, Plastic Parts, and Pump in the industry since 1991. All of our customer spool and wire carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.
ONEREEL is specialized in the manufacture of reels for cables and electric wires, iron axles, disc spool for steel cables and various delivery reels. With strong technological capabilities and full series of production equipment. All of our products go through the dynamic and static balance tests. We have passed the quality system certification ISO9001:2000 to ensure the product quality. Following the standards of GB4004-83, JB/T8997, DIN46395 and DIN46397 in productions.
Hot Product
Our Customer
Packaging & Transportation
Authoritative Certificate
FAQ
Q1: Can I get samples?
A: According to spool model and material, we will advise.
Q2: How long is the sample LEAD TIME?
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q3: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q4: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods,
we may advise FEDEX or other couriers' charge for your check.
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q5: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Q6: How about your service?
A: We have pre-sale service, in-sale service and after-sale service. As "Customer First" is the most important principle of company operation.
Audited Supplier 
){kind=link}
){kind=link}