| Customization: | Available |
|---|---|
| After-sales Service: | Forever |
| Warranty: | One Year |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Feature:
1, is, IR Type Horizontal single-stage single suction centrifugal pump designed according to the international standard ISO2858 performance and size of, mainly by the pump body, pump cover, impeller, shaft, sealing ring, shaft sleeve and suspension bearing don't see.
2, is, IR Type Horizontal single-stage single suction centrifugal pump water pump body and pump cover part is from the section at the backside of the impeller, commonly referred to as open structure. The utility model has the advantages of easy maintenance, maintenance Real pump, suction pipe, discharging pipeline and a motor, only need to remove and long axis of the middle connecting piece, you can exit the rotor parts for maintenance.
3, pump shell (i.e. pump and pump cover) constitute the pump studio. The impeller, shaft and rolling bearing for pump rotor. The suspension bearing part supporting the rotor part of the pump, rolling bearing pump axial force and radial force.
4, in order to balance the pump axial force, before most of the pump impeller, are equipped with sealing ring, and the back cover plate of the impeller balance hole is, not because of the some of the axial force of pump, the backside of the impeller did not set the sealing rings and balance holes.
5, pump axial sealing ring is composed by the packing gland, packing ring, packing and so on, to prevent intake or a large number of leaks. If the pump impeller balance is equipped with soft packing of the cavity and impeller suction port connected, such as the liquid in the impeller inlet is in a vacuum state, easily along the shaft sleeve on the surface of the inlet, so in stuffing cavity fillers are filled ring through a small hole on the cover of the pump, and the water of the pressure in the pump chamber to ring packing seal. If no balance hole on the impeller of the pump, due to the backside of the impeller fluid pressure greater than atmospheric pressure, so there is no problem of air leakage, so it can not filling ring.
6, in order to avoid shaft wear, in the shaft through the packing chamber part of which is provided with a protecting sleeve. Between the sleeve and the shaft must have o type sealing ring to prevent along the mating surface intake or leakage.
7, the drive pump is connected with the motor by lengthening the elastic coupling, the direction of rotation of the pump, viewed from the driving end, rotating in clockwise direction.
Product parameters:
| Model | Flow (m*3/h) |
Lift (m) |
Power (kw) |
Speed (r/min) |
Efficiency (%) |
NPSH (m) |
| IS50-32-125 | 12.5 | 20 | 2.2 | 2900 | 60 | 2.0 |
| IS50-32-200 | 6.3 | 8 | 0.55 | 1450 | 48 | 2.0 |
| IS50-32-250 | 12.5 | 80 | 11 | 2900 | 38 | 2.0 |
| IS65-40-315 | 25 | 125 | 30 | 2900 | 45 | 2.5 |
| IS80-50-250 | 50 | 80 | 22 | 2900 | 63 | 2.5 |
| IS80-50-315 | 25 | 32 | 5.5 | 1450 | 60 | 2.5 |
| IS100-80-125 | 100 | 20 | 11 | 2900 | 78 | 4.5 |
| IS100-65-200 | 100 | 50 | 22 | 2900 | 76 | 3.6 |
| IS100-65-315 | 50 | 32 | 11 | 1450 | 63 | 2.0 |
| IS125-100-200 | 100 | 12.5 | 7.5 | 1450 | 76 | 2.5 |
| IS125-100-315 | 200 | 125 | 90 | 2900 | 73 | 4.5 |
| IS150-125-250 | 200 | 20 | 18.5 | 1450 | 81 | 3.0 |
| IS150-125-400 | 200 | 50 | 45 | 1450 | 76 | 2.8 |
| IS200-150-315 | 400 | 32 | 55 | 1450 | 82 | 3.5 |
| IS200-150-400 | 400 | 50 | 90 | 1450 | 81 | 3.8 |
ONEREEL is specialized in the design and manufacture Steel Spools, Plastic Spools, Cable roller, Yarn Bobbin, aluminum spool , Cable Reel Stand, Sheave Pulley, Cable Conveyor, Hydraulic Puller Tensioner, Gin Poles, Cable Pulling Winch, Safety Tools, Wire Grip, Plastic Parts, and Pump in the industry since 1991. All of our customer spool and wire carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.
ONEREEL is specialized in the manufacture of reels for cables and electric wires, iron axles, disc spool for steel cables and various delivery reels. With strong technological capabilities and full series of production equipment. All of our products go through the dynamic and static balance tests. We have passed the quality system certification ISO9001:2000 to ensure the product quality. Following the standards of GB4004-83, JB/T8997, DIN46395 and DIN46397 in productions.
){kind=link}